Saltar al contenido
Region and language ES
Region and language
0 artículos en el carrito

Carrito

Tu carrito está vacío.

Care & Maintenance3 min read

Why You Should Keep Spare Tile from the Same Batch

Tile is made in lots that can differ in shade and size. Learn how shade and caliber work, how many spare tiles to keep, how to store them, and how ordering everything at once saves a repair years from now.

Why You Should Keep Spare Tile from the Same Batch

Tile is made in batches, often called lots or runs. Clay, glazes, kiln temperature and printing change slightly from one production run to the next, so each lot can have a slightly different shade and a slightly different size. Tiles from the same lot match each other. Tiles from a different lot of the same product may not, even though the name, color and size on the box are the same.

That is why the tile you buy for your project, and the spare tiles you keep afterwards, should all come from one lot.

Shade and caliber

  • Shade (tone): the exact color of the lot. Many makers print a shade or tone code on each box. Two lots of "white" can be a warm white and a cool white side by side.
  • Caliber (size): the exact size of the lot. A tile sold as 24x48 can vary by a small amount from lot to lot. Mixing two calibers makes grout joints uneven and patterns drift.
  • Shade variation by design: many tiles, especially stone-look, wood-look and handmade-look tile, are made to vary from piece to piece. Makers often rate this variation from V1 (uniform) to V4 (random). This is different from lot differences, and it is part of the look.

Read more about box labels and ratings in tile specs explained.

Why spare tile matters

Years after installation, a tile may crack from a dropped pan, a shifting slab or a plumbing repair that needs a section of wall opened. If you have spare tiles from the original lot, the repair can be close to invisible. If you do not, you may find that the same tile is now made in a new shade, or has been discontinued. Then a small repair can turn into replacing a whole floor or wall.

How many to keep

  • For a floor, keep at least a few full tiles; for large rooms or large tiles, keep more, or a full box.
  • Keep a few extra trim pieces, bullnose, corners and transition pieces too. They are often the hardest to find later.
  • For mosaics, keep at least one full sheet.
  • For showers and backsplashes, keep enough to replace the area around a fixture or valve.

Plan the spares when you order, so they come from the same lot as the rest. Our ordering guide explains how much to add for cuts and spares.

How to store spare tile

  • Keep tiles in the original box with the label, which shows the product, lot number and shade code.
  • Store flat, in a dry place such as a garage shelf or closet, not on a damp floor.
  • Write the room and the install date on the box.
  • Keep a note of the grout brand, color and type, the setting mortar and any sealer used. A photo of the bags or a note taped to the box is enough.
  • If you sell the house, leave the spare tile and the note for the new owner. It is a nice extra.

When you order

Order all the tile for your project at the same time, plus extra for cuts and spares, so everything comes from one lot. Adding a box later may bring tile from a different lot. Before installation starts, check that the lot and shade codes on all boxes match, and tell us right away if they do not.

This is also why we sell tile by the full box and accept returns only of full unopened boxes: once tiles from different lots are mixed, shade and size differences become a problem for the next customer too.

Mixing boxes during installation

Even within one lot, natural-look tiles vary by design. Good installers open several boxes and pull tiles from each as they work, so the variation spreads evenly across the floor instead of showing patches of light and dark tile. They also lay out a section dry first to check the look before setting tile.

If you need to match old tile

  • Bring or photograph a spare tile and the box label if you have it.
  • Ask us to check whether the product is still made and which lots are available.
  • If an exact match is not possible, consider a deliberate change: a border, a rug-like inset or a different tile in a separate area can look intentional instead of mismatched.

Need help?

Not sure how much to keep? Ask us when you order, and we will include spares in your quote. Browse all tile.

Shop Shop All Tile →

More Care & Maintenance

All Tips & Guides →