Saltar al contenido
Region and language ES
Region and language
0 artículos en el carrito

Carrito

Tu carrito está vacío.

Buying Guides4 min read

Tile Specs Explained: PEI, DCOF, Rectified Edges and Water Absorption

The spec table on a tile tells you where it can go. Here is what PEI, DCOF, water absorption, rectified edges and shade variation really mean.

Tile Specs Explained: PEI, DCOF, Rectified Edges and Water Absorption

Every tile on our site has a specifications table. It can look technical, but each line answers a simple question: where can this tile go, how will it look once installed, and how will it hold up over the years. This guide explains each spec in plain words, so you can compare tiles with confidence.

We only show specs the manufacturer provides. If a line is missing on a product page, it means that value was not published for that tile, not that the tile fails it. Ask us and we will confirm the details before you order.

Material and body

The first line tells you what the tile is made of: porcelain, ceramic, natural stone, glass or cement. Material decides most of the other specs. Our guide to porcelain vs ceramic tile and natural stone vs marble-look porcelain explain the main differences.

You may also see the words glazed, unglazed, through-body or color-body. A glazed tile has a decorative glass layer on top. A through-body tile has the same color all the way through, so chips show less. Color-body tiles have a body tinted close to the surface color.

Water absorption

This shows how much water the tile body can soak up. Lower is better for wet and outdoor areas.

  • 0.5% or less: porcelain under the ANSI A137.1 standard. Good for floors, showers and outdoor uses.
  • Higher values: typical for ceramic wall tile. Great indoors on walls and in many light-traffic spots, not for wet floors or outdoor areas.

Natural stone varies widely. Dense granites absorb very little, while softer limestones and travertines absorb more and need sealing.

PEI wear rating

The PEI rating, tested under ASTM C1027, tells you how well a glazed surface stands up to foot traffic and abrasion. It applies to glazed tile only. Typical guidance:

  • PEI 0: walls only, no foot traffic
  • PEI 1: very light traffic, such as a bathroom with bare feet
  • PEI 2: light traffic, such as bathrooms and bedrooms
  • PEI 3: all residential floors, including kitchens and halls
  • PEI 4: busy homes and light commercial spaces
  • PEI 5: heavy traffic

For most home floors, PEI 3 or higher is a safe choice. Unglazed porcelain usually has no PEI rating because there is no glaze to wear off.

DCOF: slip resistance

DCOF, the dynamic coefficient of friction, measures how slippery a surface is when wet. It is tested under ANSI A326.3. A DCOF of 0.42 or higher is the common minimum for level interior floors that will be walked on when wet, such as kitchens, bathrooms and entries. Showers, ramps, pool decks and outdoor areas benefit from more grip. Read outdoor and pool deck tile safety for outdoor choices.

Finish affects grip. Polished and glossy surfaces look stunning but are slicker when wet. Matte, honed, textured and structured finishes give better footing.

Finish

The finish line tells you the surface: polished, glossy, satin, matte, honed, textured or lappato, a semi-polished look. Finish changes how the tile reflects light, how it feels and how easy it is to clean. Glossy finishes are easy to wipe on walls. Matte and textured finishes hide footprints and give grip on floors.

Rectified edges

A rectified tile is cut or ground after firing so every edge is straight and every tile is the same size. That allows thinner grout joints and a clean, modern look. Non-rectified, or pressed-edge, tiles have softer, slightly varied edges and need a wider joint. Neither is better. It is a style choice, and your installer will set the joint width to suit the tile.

Shade variation

Natural looks are designed to vary from tile to tile. The rating runs from V1 to V4:

  • V1, uniform: tiles look nearly identical.
  • V2, slight: small differences in texture or pattern.
  • V3, moderate: clear differences in color and pattern from tile to tile.
  • V4, random: strong, deliberate variation, like natural stone.

With V3 and V4 tile, mix tiles from several boxes as you install so the pattern looks natural. Order all your tile at once so every box comes from the same batch, see how much tile to order.

Size, thickness and pieces per box

The nominal size, such as 12 x 24 in, is the name of the size. The real size can be slightly smaller to leave room for the grout joint. Thickness tells you how strong and heavy the tile is, and it matters where two different tiles meet.

Large-format tile, with any side 15 in or longer, needs a very flat surface and the right mortar. See our large-format tile guide.

Pieces per box and box coverage tell you how many square feet you get in one box. Our calculator on each product page uses that number to work out how many boxes you need.

Indoor, outdoor and frost

If you plan to use tile outside, check that it is rated for outdoor use. Frost resistance is tested under ASTM C1026. In Orange County freezing is rare, but sun, rain and pool water still call for a dense, low-absorption tile with good grip.

Recommended thinset and grout

Some tiles list a recommended setting material or grout. Follow it: large, heavy or glass tile often needs a specific mortar, and some natural stone needs a white or non-staining one. Our guide to choosing thinset and grout explains the options.

A quick way to read any spec table

  • Where will it go? Check material, water absorption and indoor or outdoor use.
  • Will people walk on it wet? Check DCOF and finish.
  • Will it see heavy traffic? Check PEI for glazed tile.
  • What look do you want? Check edges, shade variation and size.
  • How much do you need? Check box coverage and use the calculator.

Need help?

Not sure if a tile fits your space? Ask us. We review every project before installation. Browse floor tile or all tile.

Shop Shop All Tile →

More Buying Guides

All Tips & Guides →