Grout fills every joint between your tiles, so its color is part of what you see on every tiled surface. With small tiles and mosaics it can cover a large share of the surface. Choosing its color is one of the easiest and cheapest ways to shape the final look, and one of the hardest things to change later.
There are three basic approaches: match, contrast or blend. Here is when to use each, which colors hide dirt and how to test before you decide.
Match: calm and seamless
Grout close to the tile color makes the surface look like one piece. The eye sees the tile, not the grid. Choose this for:
- Large tiles and marble-look tile, where you want the veining to flow from tile to tile.
- Small bathrooms that should feel bigger. Read small bathroom tile ideas.
- Patterned and decorative tile, where the pattern should be the star.
- Handmade-look and zellige tile, where the color variation of the tile should lead.
Contrast: graphic and bold
Dark grout with white tile, or light grout with dark tile, outlines each piece. Choose this for:
- Subway tile when you want a classic, graphic look. Browse subway tile.
- Herringbone, chevron and other patterns you want to show off. Read tile layout patterns.
- Hexagons and other shaped tiles.
Contrast also shows every imperfection in the layout: uneven joints, lippage and crooked lines. It needs a precise installation and a flat wall or floor.
Blend: the practical middle
A grout one or two shades darker than the tile hides everyday dirt and still looks soft. This is our go-to for kitchen and bathroom floors, entries and other busy areas. On a light floor, a warm gray or sand grout ages much better than pure white.
Colors that hide dirt
- Mid-gray and warm gray.
- Sand, beige and greige.
- Charcoal on dark tile.
- Avoid pure white on floors unless you use a stain-resistant grout, such as a high-performance or epoxy grout.
Grout color by tile type
- White subway: white for a soft look, light gray for a hint of definition, charcoal for a bold graphic look.
- Marble look: white or a very light gray that matches the background of the tile.
- Stone and concrete look: a mid-gray or warm gray that picks up the main tone of the tile.
- Terracotta and warm tones: sand or a warm beige.
- Blue and green tile: white or light gray keeps it fresh; a matching tone makes it calm.
- Black tile: charcoal or black for a seamless look; white only if you want a strong graphic grid.
- Mosaics: grout changes the overall color most, so test it on a real sheet.
Grout type matters too
Color is only half of the choice. Cement grout, high-performance grout and epoxy grout differ in stain resistance, color consistency and how they are installed. Some need sealing; some do not. Read choosing thinset and grout and grout care, sealing and cleaning.
Test before you decide
- Grout colors look different once dry, and next to the tile, than in a bag or a printed chart.
- Use the maker's color sticks or a sample board, and hold them against a real tile in your room's light.
- For important projects, ask your installer to grout a sample board with two or three options.
- Look in daylight and at night with your own lights. Warm and cool bulbs change grout colors.
Keep the color even
Grout color can vary if water is added unevenly when mixing, if the joints are washed with too much water or if the grout dries unevenly. Good installers mix full units following the maker's instructions and clean with a barely damp sponge. Keep a note of the grout brand and color for future repairs. Read why you should keep spare tile.
Need help?
We help every client choose grout color before installation. Browse white tile and subway tile, and request a free estimate.