Large-Format Tile: What to Know Before You Buy
Tiles of 48 x 48 in and porcelain slabs mean almost no grout lines and a modern look, but they need a very flat surface and a skilled crew. Here is what to check before you order, including the popular 24 x 48 in size.
Large-format tile has changed the look of modern homes. Tiles of 48 x 48 in and full-size porcelain slabs give a calm, open feel with almost no grout lines. Floors flow from room to room, showers look seamless and marble-look veining runs across the whole wall. Before you fall in love with a big tile, it helps to know what it takes to install it well, because big tile is less forgiving than small tile.
What counts as large-format
At Tile Total, large-format means tile and slabs of 48 x 48 in and larger. Popular large-format sizes include:
- 48 x 48 in: a bold square for open-plan floors.
- 48 x 96 in: the classic porcelain slab for floors, shower walls and feature walls.
- 60 x 120 in and larger: full slabs, often thin porcelain made for walls, counters and fireplaces.
What about 24 x 48 in?
24 x 48 in is one of the most popular porcelain sizes in American homes today. It is not large-format on our site, but it is a long, heavy tile, and the same rules apply to it. In fact, the installation standard applies its stricter flatness and mortar rules to any tile with a side of 15 in or more, so 12 x 24 in, 24 x 24 in and 24 x 48 in tiles all need the care described below.
Benefits
- Fewer grout lines mean a cleaner look and less cleaning.
- Rooms look bigger, especially with light colors and narrow joints.
- Continuous veining on marble-look and stone-look porcelain, often book-matched across slabs.
- Great for showers, where less grout means less maintenance and fewer places for soap film to build up.
- Easy flow between rooms when the same tile runs through.
The surface must be very flat
Big tiles do not hide bumps. For tile with any side 15 in or longer, the industry standard ANSI A108.02 calls for a surface with no more than 1/8 in variation in 10 ft and no more than 1/16 in in 2 ft. That is twice as flat as the requirement for smaller tile, and with a 48 in tile every small dip shows. Most floors need some leveling before installation, often with a self-leveling underlayment or patching compound.
Skipping this step is the main cause of lippage, where one tile edge sits higher than the next. Lippage looks bad, catches light at an angle, and can catch toes and chair legs. Our guide to subfloor and wall prep explains how a good crew checks and fixes the surface.
The right mortar and coverage
Large tiles need a mortar made for large and heavy tile, often labeled LHT, applied with a larger notched trowel. Installers also back-butter each tile, spreading a thin skim coat on the back so the tile bonds fully. The goal is full contact: at least 80% coverage in dry areas and 95% in wet areas and with natural stone. Hollow spots under a big tile can lead to cracks later.
Read choosing thinset and grout for the types of mortar and when each one is used.
Leveling systems and joints
Most crews use a tile leveling system, small clips and wedges that hold neighboring edges at the same height while the mortar cures. They help, but they cannot fix a floor that is not flat.
Rectified large tiles can be set with narrow joints, but the standard calls for a joint no narrower than 1/16 in. A slightly wider joint gives the installer room to adjust and helps absorb small size differences.
Watch the offset
Many long rectangular tiles have a slight curve from firing, called warpage. If you lay them in a 1/2 running bond, the high center of one tile can meet the low edge of the next. That is why the standard recommends an offset of no more than 1/3 of the tile length for tiles with a side longer than 18 in, unless the maker says otherwise. For a 24 x 48 in tile, that means shifting each row by 16 in or less. Check the product guidance before you choose a layout, and see our tile layout patterns guide.
Large tile on walls and in showers
Big tiles on walls are heavy, so the wall must be flat, plumb and strong enough to carry the weight. In showers, large tile and slabs work beautifully on the walls and mean almost no grout to scrub. On the floor, a linear drain lets the floor slope in one plane so large tile can be used. Read choosing shower tile and large-format tile without lippage for details.
Order extra
Large tiles are harder to cut around obstacles, and one broken tile is a big loss. Add about 15% extra. Our ordering guide explains the math.
Handling and delivery
Large porcelain is heavy, and a 48 in or longer tile is easy to snap if carried flat. Plan where tiles will be stored, make sure there is a clear path into the house, including stairs, doors and corners, and keep tiles flat and dry until installation. Carry large tiles on their edge. Tiles of 24 x 48 in need two people, and slabs need suction cup lifters or a carrying frame.
Checklist before you order
- Is the floor or wall flat enough, or does it need leveling first?
- Is the layout planned with an offset of 1/3 or less for long tiles?
- Does your installer have experience with this size, and the right mortar and tools?
- Have you added about 15% extra and ordered everything from one batch?
- Will the tiles fit through the doors and up the stairs, and is there dry storage?
Common questions
- Is 24 x 48 in large-format? Not on our site, but it is one of the most popular porcelain sizes and needs the same flat surface and mortar.
- Do large tiles make a small bathroom look bigger? Often, yes. Fewer grout lines make a small floor feel calmer. See small bathroom tile ideas.
- Can I install large-format tile myself? It is one of the hardest tile jobs. Read DIY or hire a tile pro before you decide.
Need help?
Large-format installation is where an experienced crew makes the biggest difference. Our installers handle leveling, mortar and layout. Browse floor tile and send us your project for a free estimate.
Sources
Last reviewed November 3, 2026