Перейти к контенту
Товаров в корзине: 0

Корзина

Ваша корзина пуста.

Buying Guides5 min read

Porcelain vs Ceramic Tile: Which Is Right for Your Project?

Porcelain and ceramic tile look alike but behave differently. Here is how they compare on water, wear, cutting and cost, and where each one belongs.

Porcelain vs Ceramic Tile: Which Is Right for Your Project?

Walk into any tile showroom and you will see porcelain and ceramic side by side, often with the same marble, stone or wood look. They are close relatives: both are made from clay and fired in a kiln. The difference is in the recipe and the heat, and that difference decides where each tile can go in your home, how it is installed and how long it will look new.

This guide explains the real differences in plain words, shows where each type belongs room by room, and gives you a short checklist to use before you order.

What makes porcelain different

Porcelain is made from finer, denser clay with more feldspar and fired at higher temperatures. The result is a tile with a tight, glass-like body that absorbs very little water. Under the American standard ANSI A137.1, a tile qualifies as porcelain only when its water absorption is 0.5% or less. Many ceramic wall tiles absorb several times more.

Low absorption matters because water is what damages tile over time. A dense porcelain body shrugs off shower spray, wet entry floors, pool splash and outdoor weather much better than a softer ceramic body. It also resists stains that soak in from the surface.

What makes ceramic different

Ceramic tile uses a coarser clay body fired at lower temperatures, then usually finished with a glaze on top. The glaze carries the color and the pattern, which is why ceramic offers some of the richest glossy colors, crackle finishes and handmade looks. Under the glaze, the body is softer and more porous, so ceramic is best where it stays mostly dry or only gets splashed.

Where ceramic tile shines

Ceramic tile is lighter, softer and easier to cut. That makes it a great choice for:

  • Bathroom and kitchen walls
  • Backsplashes, where you want glossy glazes and rich color
  • Decorative patterns, zellige-style and handmade looks
  • Shower walls, when installed over a proper waterproofing system
  • Projects where budget matters and the tile will not see heavy foot traffic

Glossy ceramic subway tile on a shower wall is a classic for a reason: it is easy to clean, it reflects light and it usually costs less to install because it cuts quickly.

Where porcelain is the better pick

Choose porcelain when the tile has to work hard:

  • Floors in kitchens, hallways, entries and laundry rooms
  • Shower floors and full shower walls
  • Outdoor patios, covered porches and pool areas, using tile rated for outdoor use
  • Large-format tile and slabs, which need a strong, flat body
  • Fireplace hearths and surrounds, where heat and wear meet

Many porcelain tiles are also through-body or color-body, meaning the color runs into the tile. A chip on a busy floor then shows much less than on a glazed ceramic tile with a red or beige body underneath.

Room by room

  • Bathroom floor: porcelain. It handles water, cleaning products and daily traffic. For wet areas, look for a DCOF of 0.42 or higher.
  • Shower: porcelain on the floor; porcelain or ceramic on the walls. Small tiles or mosaics on the floor give more grout lines for grip. See our guide to choosing shower tile.
  • Kitchen floor: porcelain. Dropped pans, chairs and spills are hard on softer tile.
  • Backsplash: either. Ceramic wins on color and glaze; porcelain wins on large, seamless slabs. Browse ideas in kitchen backsplash ideas.
  • Outdoor and pool deck: porcelain only, with a slip rating made for outdoor wet use. Read outdoor and pool deck tile safety.
  • Fireplace: porcelain, ceramic or natural stone, all noncombustible. Clearances to trim and mantels still apply, see fireplace tile code in California.

Quick comparison

  • Water absorption: porcelain 0.5% or less; ceramic usually higher
  • Strength and wear: porcelain is denser and better for floors
  • Cutting and installation: ceramic is easier and often less expensive to install
  • Weight: porcelain is heavier, which matters for walls and large formats
  • Color and glaze: ceramic offers the widest range of glossy and handmade finishes
  • Price: ceramic is often less per square foot, but both come in every budget

Installation differences you should know

Because porcelain is so dense, it needs the right setting material and tools. Installers use diamond blades, and many porcelain and large-format tiles call for a polymer-modified thinset or a mortar made for large and heavy tile. Coverage under the tile matters too: industry practice calls for at least 80% mortar contact in dry areas and 95% in wet areas and on all natural stone. Our guide to choosing thinset and grout explains the options.

Ceramic cuts faster and is lighter on the wall, which is one reason a ceramic wall can cost less to install. For tile 15 inches and larger on any side, the floor or wall must be flatter, so read our large-format tile guide before you choose big porcelain.

How to read the label

Do not rely on the word "porcelain" alone. Check the specifications on the product page:

  • Water absorption: 0.5% or less means porcelain.
  • PEI rating: how well a glazed surface resists wear, from 0 to 5. For most home floors, look for 3 or higher.
  • DCOF: the wet slip value. 0.42 or higher is the common minimum for level interior floors that get wet.

Our guide to tile specs explains each one in plain words.

Checklist before you order

  • Decide room by room which spots get water, heavy traffic or sun.
  • Pick porcelain for floors, showers and outdoors; use ceramic freely on walls and backsplashes.
  • Check water absorption, PEI and DCOF on the product page.
  • Order enough for cuts and spares from one batch, see how much tile to order.
  • Ask us about setting materials if you choose large or heavy porcelain.

Common questions

  • Is porcelain always better? No. It is tougher, but ceramic is often the better pick for walls and color, and it is easier to cut and install.
  • Can I use ceramic on a floor? Some ceramic tiles are rated for light-traffic floors. Check the PEI rating and the DCOF before you choose it, and keep it out of wet areas and outdoors.
  • Can I mix porcelain and ceramic in one bathroom? Yes. A porcelain floor with a ceramic accent wall is very common. Keep tile thicknesses in mind where they meet.

Our recommendation

For most Orange County homes, we suggest porcelain on floors, in showers and outdoors, and ceramic where you want color and texture on walls. Mixing the two in one bathroom is completely normal and often the smartest use of your budget.

Need help?

Not sure which tile fits your room? Send us your project details and our team will help you choose, measure and plan the installation. You can browse our porcelain tile and ceramic tile to get started.

Shop Керамогранит →

More Buying Guides

All Tips & Guides →