Перейти к контенту
Товаров в корзине: 0

Корзина

Ваша корзина пуста.

Care & Maintenance4 min read

Natural Stone Care: Sealing, Cleaning and What to Avoid

Marble, travertine, limestone, slate and granite are beautiful and porous. Here is how to seal them, which cleaners are safe, and how to tell etching from stains.

Natural Stone Care: Sealing, Cleaning and What to Avoid

Natural stone rewards a little care with a lifetime of beauty. Marble, travertine, limestone, slate and granite each have their own character, and none of them will look exactly like another piece. Most problems with stone floors and showers do not come from the stone itself. They come from the wrong cleaner, a skipped sealer or grit that wears the surface down.

Here is how to care for natural stone tile, based on guidance from the Natural Stone Institute and experienced installers.

Know your stone

Natural stone falls into two broad groups, and the group decides which cleaners are safe:

  • Calcareous stone: marble, limestone, travertine and onyx. These are made mostly of calcium carbonate and react with acids. Lemon, vinegar, wine and many bathroom cleaners can dull the surface in seconds.
  • Siliceous stone: granite, slate and quartzite. These are harder and more resistant to acids, but they are still porous and still benefit from a sealer and gentle cleaners.

If you are not sure which stone you have, check the product page or ask us. When in doubt, treat it like marble.

Seal the stone

Most natural stone is porous and should be sealed with a penetrating (impregnating) sealer after installation. The sealer soaks into the stone and the grout and slows down how fast liquids soak in, giving you time to wipe them up. It does not make stone stain-proof, and it does not stop etching from acids.

  • Seal after the stone is installed, grouted, cleaned and fully dry.
  • Some stones are sealed before grouting too, so grout does not stain the surface. Your installer will follow the sealer and grout makers' instructions.
  • Seal the grout at the same time.
  • Use a sealer made for natural stone and for your use, such as showers or outdoor areas.

A simple water test tells you when to reseal: drip a little water on the stone in a busy spot. If it darkens the stone within a few minutes, it is time to reseal. Follow the sealer maker's instructions for how often. Kitchens, showers and entry floors usually need it sooner than a guest bath.

Use pH-neutral cleaners

  • Do use: warm water and a cleaner labeled safe for natural stone, with a soft microfiber mop or cloth.
  • Avoid on marble, limestone and travertine: vinegar, lemon, bleach, ammonia, and general bathroom, glass or tub cleaners. Many contain acids or strong alkalis that etch or dull stone.
  • Never use: abrasive powders, scrub creams or steel wool on polished stone.
  • Rinse and dry: after cleaning, rinse with clean water and dry polished surfaces to prevent water spots.

Etching vs stains

  • Etching is a dull, lighter spot caused by acid, such as wine, citrus, tomato, soda or some cleaners, reacting with calcium-based stone like marble. It is surface damage, not a stain. Light etching on honed stone can often be buffed out; on polished stone it usually needs professional polishing.
  • Stains are dark or colored marks where a liquid soaked in. Oil, coffee, wine and rust behave differently. Many can be drawn out with a poultice made for stone: a paste that is spread over the stain, covered, left to dry and then removed, pulling the stain out with it.

Test any product in a hidden spot first, and call a stone professional for large or old stains.

Showers and bathrooms

  • Squeegee walls and floors after each use and keep the room ventilated.
  • Use a stone-safe shower cleaner. Most soap scum removers are acidic and will etch marble.
  • Rinse off soap, shampoo and hair products. Some leave residue or dull the surface over time.
  • Hard water spots on marble need a product made for stone, not an acid descaler. Read hard water stains.

Floors and outdoor stone

  • Use mats at entries to catch grit, and felt pads under furniture.
  • Sweep or dust mop often. Grit scratches polished stone faster than anything else.
  • Outdoor travertine and limestone collect dirt in their pores and holes. Rinse and scrub with a stone-safe cleaner and reseal as the sealer maker recommends.

Honed or polished?

Polished marble shows etching and scratches easily, and it is more slippery when wet. Honed (matte) finishes hide small etch marks better and suit floors and showers. Tumbled and brushed finishes hide wear best of all. If you want the look of marble with less care, compare natural stone vs marble-look porcelain.

Everyday tips

  • Blot spills, do not wipe them across the stone.
  • Use coasters and trays on marble vanities and counters.
  • Keep acidic foods and drinks off marble surfaces.
  • Check grout and sealant once a year.

Need help?

Our team installs and seals natural stone across Orange County. Browse natural stone tile and marble look tile.

Shop Плитка из натурального камня →

More Care & Maintenance

All Tips & Guides →