Skip to content
Region and language EN
Region and language
0 items in cart

Cart

Your cart is empty.

Permits & Codes4 min read

Outdoor and Pool Deck Tile: Slip Resistance and Code Basics

Outdoor tile in Southern California faces sun, water and bare feet. Learn how slip ratings work outdoors, which tile to choose, and what to check before tiling a patio or pool deck.

Outdoor and Pool Deck Tile: Slip Resistance and Code Basics

Outdoor living is a big part of Orange County homes. A tiled patio, entry or pool deck extends the house outside and looks great for years, but it has to stay safe when wet, hold up to strong sun and handle water that comes from sprinklers, rain and swimmers. Outdoor tile is chosen and installed differently from indoor tile.

Here is what to check before you choose tile for a patio or pool deck, and what to expect from a good installation.

Slip resistance outdoors

The common DCOF value of 0.42 applies to level interior floors that will be walked on when wet. It is not meant for outdoor areas. Since 2021, the ANSI A326.3 standard classifies tile into product use categories: Interior Dry, Interior Wet, Interior Wet Plus, Exterior Wet, and Oils/Greases.

  • Patios, entries and walkways: look for tile the maker classifies as Exterior Wet.
  • Pool decks and other areas with bare feet and standing water: look for a classification the maker recommends for those uses and a textured or structured surface.
  • Ramps and slopes: need more grip than level floors. Ask for the maker's guidance.

Polished and glossy tiles should not be used outdoors. A matte or textured finish, often sold as a "grip", "anti-slip" or "outdoor" finish, is the right choice. Read tile specs explained for how DCOF is measured.

Choose a dense tile

Outdoor tile should have very low water absorption, so it does not soak up water, stain or crack. Porcelain with absorption of 0.5% or less under ANSI A137.1 is the most common choice. Many natural stones such as travertine, granite and some limestones also work well outdoors when they are rated for exterior use and sealed.

For outdoor areas we offer porcelain and natural stone only. Ceramic wall and floor tile usually absorbs more water than porcelain and is meant for interiors, and small mosaics on mesh are not meant for patios and decks.

Frost is rarely an issue on the coast, but if the tile is for a mountain home that sees freezing, look for tile tested for frost resistance under ASTM C1026.

Outdoor porcelain pavers

Thick porcelain pavers, often about 3/4 in or 2 cm thick, are made for outdoor use. Depending on the system, they can be set in mortar on a slab, laid on sand or gravel, or placed on pedestals over a roof deck or a waterproof membrane. They are strong, slip resistant and easy to lift for repairs. Follow the maker's installation method for the base you have.

Heat and color

Dark tile in direct California sun can get very hot underfoot, which matters on pool decks where people walk barefoot. Lighter colors and natural stone with a light tone stay cooler. If you love a dark color, use it in shaded areas or as an accent border.

Structure under outdoor tile

  • A solid base. Tile outdoors needs a sound concrete slab or a system base approved by the tile maker.
  • Slope for drainage. The surface should slope away from the house so water never runs toward walls or doors. Water that sits under or on tile causes stains, efflorescence and loose tiles.
  • Movement joints. Outdoor tile expands and contracts with heat and sun much more than indoor tile. Joints at the perimeter, at the house wall and across large areas are essential, and they should follow any joints in the slab below.
  • Full mortar coverage. Outdoor tile needs full support so water cannot collect in voids under the tile.
  • Exterior-rated materials. Use mortar, grout and sealant rated for exterior use and for wet areas.

Around the pool

Pool decks combine water, chemicals, bare feet and sun. Choose a deck tile the maker recommends for pool surrounds, plan a drainage line away from the pool, and use bullnose or coping pieces made for the pool edge. Keep the pool water chemistry balanced, because water that is out of balance can etch grout and stain stone.

Permits, pool safety and HOA

Replacing the finish on an existing patio is often finish work, but new slabs, pool work, raised decks and structural changes may need permits. When a pool is built or remodeled under a permit, California's pool safety rules can require drowning prevention features, such as barriers or alarms. Check with your city building department. In HOA communities, exterior work usually needs approval. See our HOA guide.

Care for outdoor tile

  • Sweep or blow off leaves and sand often, since grit wears the surface.
  • Rinse after parties and pool season, and clean with a pH-neutral cleaner.
  • Reseal natural stone and cement grout as the sealer maker recommends.
  • Check movement joints every year and replace cracked sealant.

Need help?

Our crew installs outdoor and pool deck tile across Orange County. Browse outdoor and patio tile and request a free estimate.

This article is general information about California and Orange County rules, not legal advice. Requirements change and differ by city, so always confirm with your city building department before you start.

Shop Outdoor Patio Tile →

More Permits & Codes

All Tips & Guides →